Home

Tiles and Technical Ceramics Tableware
Flowers Pots and Art Ceramics Sanitary Ware

Home
Index
Tiles
Tableware
Flower Pots
Sanitaryware
Contact Us

Versione italiana
Versione italiana

 Shaping units UF Technical Features
Schemes
The Shaping Units UF 200 and UF 400 are machines with rotating heated shaping head, they allow for a production of ceramic articles in various shapes and with particularly high quality.
They carry out the shaping of the ceramic body either internally or externally of the plaster moulds.
The units are equipped with a device for undercut working.

Features:
- function either in manual or automatic working cycle;
- linear movements hydraulically commanded;
- working parameters (speed, stroke, time) separately adjustable;
- tachometer for speed control of spindle and caliper (only UF 400);
- vacuum plant for holding the plaster moulds in their place during shaping.

Shaping units UF 200 and UF 400 can be supplied complete of hot air dryers or plaster moulds transferring, obtaining a complete automatic line characterised by high productivity and minimum labour use.
 
UF 200 UF 200 UF 400 UF 400
Top

TECHNICAL FEATURES
PRODUCTION PIECES/HOUR (approx.)
Bowls  
 UF 200 UF 400



Maximum
dimensions
(mm)		 ø210xh130 ø360xh230
Pieces/hour 250÷300 150÷200
Plates  




Diameters
(mm)		 ø70÷ø265 ø170÷ø420
Pieces/hour 350÷400

250÷300

 300÷400

100÷200
Pots  


Maximum
dimensions
(mm)		 ø210xh130 ø360xh230
Pieces/hour 150÷200 100÷150
MAXIMUM DIMENSIONS OF SHAPING MOULDS
 
 UF 200 UF 400
Maximum
dimensions
(mm)		 ø300xh170 ø440xh270
Maximum
dimensions
(mm)		 ø300xh110 ø460xh130
Maximum
dimensions
(mm)		 ø300xh170 ø440xh270
The production rate depends on the type of plaster moulds. The shaping time is approximately the same as for internal shaping.

 

POWER AND MEASURES UF 200 UF 400
Motor power of hot head kW 0.75 1.5
Motor power of spindle kW 1.1 3
Max stroke of undercut mm 30 50
Heating of hot head kW 3 5.5
Motor power hydraulic power pack kW 2.2 4
Total power installed kW 8 14.5
Total weight approximately Kg 1000 2000
Top
 
UF200
AUTOMATIC LINE LPI 360

1 - Shaping unit
2 - Plaster mould transfer
3 - Leather-hard dryer
4 - Clay feeder
5 - Electric panel
6 - 8 positions finishing machine
7 - Transfer
8 - Discharging belt		 WS - Water feeding
WW - Water discharge
AS - Air suction
ES - Electrical suction
GS - Gas suction
Top