DIAPHRAGM PUMPS PM
The pumps PM Vicentini are diaphragm pumps driven by a hydraulic-mechanical system permitting free regulation of the pressure in delivery.
Rugged construction, simple installation, easy operating and reduced maintenance are the main characteristics of our pumps. They are mostly used for feeding of filter pressing plants, for casting lines or plants and for transfer of dense liquids or liquids keeping solid materials in suspension.

DIAPHRAGM PUMP
The pump PMPV 50 is a pneumatically controlled pump, suitable for the decantation of sludgy and viscous liquids, or liquids keeping in suspension solid and/or abrasive substances, with grain size not exceeding 7 mm.
The particular working characteristics and the construction itself (the parts in contact with the liquid are in stainless material) allow for this pump to be used in different fields.
Performances reported on the diagram are obtained in ideal conditions, and may vary, considering resistance in the circuit and the characteristics of the incoming compressed air.
Max. operating pressure: 6 bar
Simple installation and use, easy and economic maintenance.

PLUNGER PISTON PUMPS
The pumps PMPT with plunger pistons are suitable for the pumping of ceramic slip. They are operated by hydraulic cylinders which are mechanically connected to the plunger pistons.
A particular feature of the pump PMPT are its pistons in porcelain, which reduce wear and tear as well as contamination of the slip.